Allison 3000 Series Transmission Bypass Filter Kit
Cleaner fluid for your hardworking Allison.
The Insane Diesel Allison 3000 Series Transmission Bypass Filter Kit adds fine filtration to your work truck's transmission, helping reduce abrasive contamination circulating through the valve body and other hydraulic components that control shifting. It works alongside your factory filters, adding protection for demanding hauling and commercial use.
A controlled portion of transmission fluid passes through our EXTREME3 filter in three progressively finer stages: 10 micron, 3 micron, and finally 1 micron. Each stage targets smaller contaminants before the filtered fluid returns to the transmission.
Installed and Tested in Our Shop
Our team installed this kit on an Allison MD3060 transmission paired with a 7.2L Caterpillar engine. While this was our original installation, the kit is intended for the broader Allison 3000 Series used across many commercial trucks and engine configurations.
Parts Included In This Kit
- 1 EXTREME3 bypass filter housing (HX3LH)
- 1 EXTREME3 filter element (EX3LE) with o-rings (GX3)
- 2 In/Out port fittings (ANMJ06-7-16-20OR90) + (AN06-06FJ)
- 1 Mounting bracket with hardware (ZBRCKX13)
- 14 ft Hose
- 1 Pressure port fitting assembly (716orifice) + (AN06-02MS90)
- 1 Return port fitting assembly (AN12-AN06) + (AN06-06FJ90)
Transmission and Vehicle Applications
Designed for Allison 3000 Series automatic transmissions, including the older MD3060 and select 3000 RDS, HS, and other Series configurations used in medium- and heavy-duty commercial vehicles.
Examples of trucks offered with Allison 3000 Series transmissions include:
- Freightliner M2 106 Plus
- Kenworth T370
- Peterbilt 548
- Mack MD7
- Hino 338 and select larger models
Common Engine Pairings
Allison 3000 Series transmissions have been offered with a wide range of diesel engines, including:
- Cummins: ISB 6.7, B6.7, ISC, ISL 8.9, L9
- PACCAR: PX-7, PX-9
- Detroit Diesel: DD8
- Caterpillar: 3126, C7, C9
- Hino: J08E, A09
- Navistar / International: A26, MaxxForce DT, 9, 10
Fitment is determined by the transmission, not the engine alone. Not every truck or engine configuration listed above uses an Allison 3000 Series transmission.
Commercial Truck and Fleet Applications
Allison 3000 Series transmissions are used across a variety of commercial and vocational industries, including:
- Construction and heavy vocational trucks
- Refuse, waste, and recycling fleets
- Emergency response and municipal vehicles
- Regional distribution and beverage delivery
- Utility, telecom, and service trucks
- Transit, shuttle, and school buses
- Agricultural and specialized work equipment
Before ordering: Confirm your exact Allison transmission model, pressure and return connections, mounting space, and hose routing. Vehicle and engine examples do not guarantee kit fitment.
Need help confirming your setup? Call us at (801) 901-0667.
Questions or Need Help?
Call (801) 901-0667
EXTREME1 and EXTREME2 Filter Change Interval:
- Pickup Diesel Engines: 15,000 miles, 250 hours, or 1 year, whichever comes first.
- Gas Engines: 20,000 miles, 250 hours, or 1 year, whichever comes first.
EXTREME3 and EXTREME4 Filter Change Interval:
- Heavy-Duty Diesel Engines: 25,000 miles, 500 hours, or 1 year, whichever comes first.
Shipping, Returns & Refund Policy
U.S. Shipping
We may occasionally use a shipping carrier different from the one selected at checkout to improve delivery speed, protect fragile items, or reduce overall shipping and handling costs, including packaging and processing.
Expedited Shipping Policy:
Selecting expedited shipping (Overnight, 2-Day, etc.) does not include order processing time. Please allow 1–2 business days for processing, excluding weekends.
For faster delivery options, contact our Shipping Department at (801) 901-0667 Ext. 3.
International Shipping
International shipping charges are calculated at checkout and do not include customs duties, taxes, brokerage fees, or tariffs imposed by your country upon import. These fees are not controlled by Insane Diesel and vary by location and local regulations.
Customers are solely responsible for all import-related charges. We strongly recommend contacting your local customs office or postal service in advance to understand applicable fees before placing an order.
Canada: Estimated duties and taxes may be reviewed at https://www.cbsa-asfc.gc.ca/travel-voyage/dte-acl/est-cal-eng.html
Return & Refund Policy
General Return Policy
Due to the nature of aftermarket automotive components, returns are not accepted for buyer’s remorse, incorrect ordering, or compatibility issues. Customers are responsible for verifying vehicle compatibility prior to purchase. We encourage reviewing installation guides and confirming pressure and return port locations before ordering.
Products that have been installed, used, modified, contaminated with oil or fluids, or show signs of installation are not eligible for return or refund, except where required by law.
Any return request must be approved in advance. Returns sent without authorization may be refused.
Damaged, Defective or Missing Items
All products are inspected prior to shipment. If your order arrives damaged or defective, you must notify us within 7 business days of delivery and provide clear photos of the damage and packaging.Â
Only unused items in original condition are eligible for replacement or refund. Upon inspection and confirmation, you may choose between a replacement or a full refund.
Missing components must be reported within 15 days of the delivery date. Each order is packed individually to help ensure all components are included and to maintain quality control. A packing slip/manifest is included with every shipment; please review it upon delivery to verify that all components were received.
Approved Returns & Refunds
In rare cases where a return is approved (outside of damage on arrival), requests must be made within 30 days of delivery.
Approved refunds will be issued minus:
- Return shipping costs
- Original outbound shipping costs (even if free shipping was offered)
- Payment processing fees charged by Shopify (approximately 2.4–2.5% + $0.30)
Refunds are issued to the original payment method after returned items are received and inspected.
Contact Us
If you have questions about shipping, returns, or refunds, please contact us at support@insanediesel.com.
Anodized Finish:
Our housings feature a high-quality anodized finish. Because anodized colors can photograph differently under various lighting conditions, the color shown online may appear slightly different in person. Minor tone, shading, or finish variation can also occur naturally from the anodizing process and is a normal characteristic of this type of premium finish.
Product Images:
Product images, especially kit photos, may show earlier versions of certain components. Some parts have since been updated to newer, improved generations and may appear slightly than images. These are the main components that have changed:
• Oil filler caps no longer come with brass swivel center. Replaced with new generation cap that works with our upgraded swivel fittings.
• Fittings in images may have changed slightly as we rolled out with improved versions for simplified installation.
• Steel or brass fittings in images may have changed to our new black fittings to reduce the need for multiple connection points.
• Some mounting brackets have been updated for easier and more convenient access.
Images will be updated soon. Thank you for your patience!